Store
- All Products
- Coated Black Foils & Films
- Pinholes and Slits, Beam Dumps, Mount Tubes
- Microarray slides & Microplates
- Black Coating Services
Showing the single result
Coated Black Foils & Films
Acktar Coatings are available not only by direct application to parts, but also as coated foil or film.
The coated foils enable the customer to benefit from Acktar coatings performance without sending the parts to Acktar.
This is an ideal solution for very large quantities, over-sized part areas and for contaminated environments where the light absorbing surface needs to be periodically renewed.
The black foil coating available either with or without an adhesive backing as sheets, die-cuts or roll.
Showing the single result
-
Lambertian BlackTM Steel Foil
Extremely Black & Diffusive at UV-VIS-IR$197 – $223
- Essentially zero outgassing
- Vacuum and thermal-vacuum cycling compatible
- No particulation
- Only a few microns thick
- Virtually adheres to all substrate materials
-
BlackOutTM Material
Low-reflective Black Foil$33 – $72
- Ultra - Diffusive-matte
- EUV-FIR
- Completely inorganic
- Aluminum foil
-
Light Absorbing Sample Kit
Acktar Black Deposition Total Inorganic Coatings - The Ultimate Solution for Light Absorption$263 – $288
- Blackest material in the world
- Standard and low outgassing adhesive types
- The blackest black top sellers in a small kit
-
Stray Light Control Kit
2D Black Foil Preforms$167
- Metal Velvet
- Aluminum Foil
- Ultra - Diffusive-matte
- EUV-FIR
- Specular absorptance 99.9% & wide band performance
-
Die-Cut Light Blocking Black Labels
Tight-tolerance Ultra Black$78 – $285
- Metal Velvet / Spectral Black / MAXiBLACK
- Ultra -Diffusive-matte / Semi-Specular / Diffusive
- EUV-FIR / VIS-MWIR
- 120 microns / 130 microns / 80
- 180 microns / 190 microns / 110 or 140 microns
-
MaxiblackTM Polymer Film
Diffusive Black Abrasion Resistant Polyimide Film, Optical density > 7.0$101 – $5,695
- Polymer film
- Diffusive
- Anti-flare
- VIS-SWIR
- Anti-static
- Completely inorganic
-
Spectral Black foil
Semi-specular Wideband Black Light-shielding Aluminum Foil$101 – $5,695
- Semi-Specular
- EUV-FIR
- Completely Inorganic
- Aluminum foil
-
Metal VelvetTM Black Foil
Diffusive Wideband Absorbing Aluminum Foil for Low Reflection and High Emissivity$101 – $5,695
- Specular absorptance 99.9% & wide band performance
- Ultra - Diffusive-matte
- EUV-FIR
- Completely inorganic
- Aluminum foil
Pinholes and Slits, Beam Dumps, Mount Tubes
These black-coated optomechanical components and mounts for optical applications are perfect to reduce noise, unwanted reflections and increase the efficiency of the optical system.
Optical baffles, apertures, beam dumps, extension tubes, blackened lenses, DMD projector parts, remote sensing targets, optical choppers, edge blackened optics can be purchased online or choose our coating services to blacken and coat your parts for best optical performance.
Showing the single result
-
Hexa Black Light Trap Sheets
Wide-band absorption at grazing angles out to 88˚$168
- Lowest reflectance at grazing angles out to 88° AOI
- Extremely wide band performance – UV thru MWIR
- Lightweight aluminum construction
- High abrasion resistance
- Flexible
- Standard size: 250mm x 120mm x 2mm, custom size available
-
Precision Pinholes & Air Slits
Wide-band, low reflectance from UV through VIS to NIR coating$95 – $177
- Super black, wide-band, low reflectance from UV through VIS to MWIR coating
- 2 sides blackened
- Available pinholes: 20µm, 25µm, 30µm, 35µm, 40µm, 50µm, 75µm, 100µm, 150µm, 200µm, 300µm, 400µm, 500µm, 600µm, 700µm, 800µm, 900µm, 1000µm, 1500µm
- Available slits (3mm width): 25µm, 50µm, 75µm, 100µm, 150µm, 200µm, 500µm, 1000µm.
- Tolerance: ±5µm
- Available mount OD: 0.5 inch, 16mm, 18mm, 25mm
-
Light Absorbing Panels – Hexa Black, Metal Velvet, Spectral Black
Wide-band absorption at grazing angles from 0 ˚ to 88˚$51 – $248
- Hexa Black™, Metal Velvet™ and Spectral Black™ Technologies
- Lowest reflectance at grazing angles out to 88° AOI for Hexa Black™ panels
- Extremely wide band performance – UV thru MWIR (LWIR for Metal Velvet™ and Hexa Black™)
- High abrasion resistance of Hexa Black™ panels
-
Hexa Black Noise Reduction Extension Tubes
Extremely effective noise and stray light reduction$149
- Extremely effective noise and stray light reduction
- Adding a fixed spacing between components
- Male / female C-mount threads at opposite ends
- Available tube lengths: 5mm, 10mm, 15mm, 25mm, 50mm, 100mm
-
Laser Beam Dumps
For CW and pulsed beams up to 10W/cm2 at range 200nm - 10µm$45 – $298
- Reflectivity factor: <10-6 (tube beam dumps)
- Laser Beam diameter: 30mm – 81mm
- Laser Beam power density up to 20W/cm2
- Wavelengths range: 100nm - 10µm
- Standard mounting thread: M6 x 1.0
- Unique: C-Mount thread (additional ring LBD-T-30-C1)
Microarray slides & Microplates
3D biOptical Surfaces for improving bioassays
Microplates (a.k.a microtiter plates) and microarray slides for analysis and high-throughput screening as well as special products;
for the cultivation and analysis of cell and tissue cultures and cell culture-based assays.
– For low detection limits
– Provides high binding, loading and absorptive capacities for biomolecules
With enhanced characteristics:
– Zero fluorescence background (ELISA – fluorescent detection)
– Extremely high light absorptance
– Improved signal to noise ratio
– With controlled structural and chemical properties
Showing the single result
-
96 Black Well Plates & Black Strip Plates
3D high surface area black coated microtiter plates for high sensitivity of fluorescence detection.
- Acktar black coated polystyrene microtiter plates for general assays and immunoassays
- Zero auto-fluorescence
- Cross talk suppression
- High absorption (ideal suppression of stray light) microwell plate
- High binding capacity microplate
- High surface areas
- Beyond plate readers sensitivity (LOD – limit of detection)
- No background noise
- Available also with thermally conductive bottom
- Compatible with patterning processes - lithography & ablation
-
Acktar 3DTM Microarray Slides
Black, clear and white microarray slides with increased sensitivity, high intensity of signal and zero autofluorescence.
- Microarray slides for high throughput screening as well as general assays and analysis
- Provides high binding capacity of biomolecules for higher intensity of signals and better spot morphology and zero fluorescence background
- Pico molar level detection
- Proprietary 3D thin inorganic film
- Film thickness < microns
- New highly advantageous replacement of nitrocellulose
- Operational temperature: cryogenic – 350 degrees Centigrade
- Available in various colors: Black / White / Clear
- Wide range tailored contact angle from: 3° to 140°
- Tailored functional groups
- Zero to Low auto-fluorescence
Black Coating Services
Suppress stray light in high-performance optics with no extra effort using advanced optical black coatings for stray light absorption in ultra-violet, visible light spectrum and Infra-red wavelengths.
Extremely low reflectance, high thermal stability, high absorptance, high emissivity, excellent adhesion to essentially all materials and low outgassing in a few microns of a coating.
You say when and we coat it for you!
Showing the single result
